A garment sample is the last real checkpoint before your team kit moves into bulk production. Knowing how to approve garment samples properly protects more than a club budget – it protects race-day confidence, team identity and the deadline everyone is working towards.
For dragon boat crews and paddling clubs, approval should not be a quick look at a photo followed by a thumbs-up in the team chat. A rashie that feels restrictive through the shoulders, shorts that sit awkwardly when seated, or a club colour that prints darker than expected can affect how the whole order is received. Give the sample the same attention you would give a race plan: appoint the right people, check the details and make a clear decision.
Start with the approved artwork
Before inspecting the garment itself, compare it with the final design artwork. Use the version that was formally signed off, not an earlier concept saved on somebody’s mobile phone. This avoids a common problem where a sample is technically correct, but is being judged against an outdated design.
Check the placement and scale of every important visual element. That includes the club logo, crew name, sponsor marks, paddle patterns, athlete names and any event-specific graphics. On a racerback rashie, for example, the available back area differs from a short-sleeve jersey. A design may need to be positioned differently to sit well around seams, armholes or panels.
Look carefully at orientation too. Stripes should run in the intended direction, text must read correctly, and repeated patterns should meet neatly across joins where practical. Small differences can be acceptable when a garment is cut and sewn, but a logo that sits noticeably off-centre or text that is too close to a seam should be raised before approval.
How to approve garment samples for fit and movement
A paddling garment cannot be approved properly from a hanger. Ask a representative wearer to try it on, ideally someone close to the size it was developed for. They should raise their arms, rotate through the shoulders, bend forward and sit in a paddling position if possible.
A good training or race top should feel close enough to avoid excess fabric catching wind or water, without pulling across the chest, shoulders or upper back. Pay particular attention to raglan sleeves and racerback cuts, as these are designed around shoulder movement but must still suit the team’s chosen fit. A more relaxed social shirt has different expectations, so judge it against its intended use rather than applying race-kit standards to every garment.
For board shorts, padded shorts and leggings, check the waistband, rise and leg opening. They should remain comfortable when seated and moving, rather than rolling, pinching or exposing more than intended. If the sample is one size only, you cannot confirm every member’s fit, but you can assess whether the cut aligns with the size chart and the profile your club expects.
This is also the point to confirm whether your order needs a unisex, women’s-specific or youth fit option. It is far easier to settle that question before the size collection goes out to the squad.
Inspect colour in the right conditions
Club colours carry real meaning. Whether your crew races in a familiar navy and white, bright tropical tones or a bold festival design, check the sample in daylight where possible. Indoor lighting can make blues, greens and reds appear very different.
Sublimation printing produces vibrant, durable colour because the design becomes part of the fabric, rather than sitting on top of it. Even so, colours on fabric can differ slightly from colours viewed on a backlit screen. This is particularly relevant for fluorescent shades, deep blacks and subtle tonal gradients.
Compare the sample to any existing club kit, logo guidelines or colour references you have. If exact colour matching is essential for a sponsor or established team identity, state that early in the design process and keep one agreed reference point. Avoid asking for changes based only on multiple mobile phone screens, as their display settings can vary considerably.
Check print, fabric and construction together
A sample should look sharp, but it also needs to be made for the water and the workload. Examine the print around seams, underarms, side panels and curved areas. The artwork should remain clear rather than becoming distorted in a way that changes the design’s appearance.
Then inspect the construction. Check that stitching is tidy and secure, hems sit flat, zips operate smoothly where included, and panels are aligned. Turn the garment inside out if you can. Loose threads are not always a sign of a serious fault, but uneven seams, missed stitching or obvious puckering deserve a query.
Fabric choice should suit the garment category. Lightweight, quick-drying performance fabric is useful for hard training and racing rashies, while a windbreaker needs enough structure to provide practical cover around the venue. Hoodies and social shirts can prioritise warmth, comfort and off-water presentation. A single club order may contain all of these, so do not approve one item and assume every category will perform in the same way.
Gather feedback without creating confusion
Samples can attract plenty of opinions, especially in a close-knit club. The aim is not to eliminate feedback, but to organise it. Nominate one approval lead, such as the kit manager, captain or committee member, and agree who else needs to review the sample before it arrives.
Give reviewers a short brief: check accuracy against the approved design, functional fit, colour, finish and any personalisation details. Ask for specific comments rather than general reactions. “The logo needs moving 2 cm away from the side seam” is actionable. “It looks odd” is not.
Where feedback conflicts, return to the order’s purpose. A race crew may value a close performance fit, while a club placing kit for volunteers and social events may reasonably prefer a more relaxed option. There is no universal best answer, only the right choice for the garment’s use and the people wearing it.
Record changes clearly before production
If amendments are needed, send them as one consolidated response. Mark up images if that helps, reference the garment and panel concerned, and describe the requested change in plain language. Include any revised artwork files where relevant.
Avoid sending several separate messages as ideas emerge. Fragmented feedback increases the risk of a detail being missed, particularly when a deadline is close. Once changes are confirmed, make sure the final approval is explicit. A clear written instruction such as “Approved for bulk production” gives both the club and production team a reliable record.
Do not approve a sample on the assumption that a small issue will be corrected automatically. If something matters, ask the question. Equally, avoid reopening settled design decisions unless there is a genuine error. Repeated late revisions can affect the production schedule, which matters when regattas, overseas events and team launches are fixed in the calendar.
Confirm the production details at the same time
Sample approval is the ideal moment to check the practical order information one last time. Confirm garment styles, quantities, size breakdown, names and numbers, and delivery contact details. For a large squad, a spreadsheet checked by two people is often worth the extra ten minutes.
Also consider timing honestly. A finished design may move through production on a defined lead time, but extra design development, late size changes or approval delays can narrow the margin before a major race. Build in contingency where you can, especially for championship weekends or events where the team will be travelling together.
At bluesupply.asia, strike-off confirmation is part of the process of making sure custom team apparel reflects the agreed design before the full run is made. It gives clubs a practical chance to check what will be worn on the water, not just what looked good in a digital mock-up.
A carefully approved sample gives your crew one less thing to worry about as race day approaches. Make the decision with the garment in hand, the final artwork beside it and the team’s real paddling needs in mind – then you can place the bulk order with confidence.
